UFO Drivetrain Essentials Bundle

Shake well before use and keep out of direct sunlight. DO NOT APPLY TO DISC BRAKE PADS.

Use by spraying UFO Drivetrain Cleaner to your chain, cassette, and chainrings and scrub with a brush to break down surface contaminants, waxes, or grease. Let sit for 3-5 minutes for the best results. Rinse thoroughly with water. UFO Drivetrain cleaner is activated with water and will turn milky white first and then when the chain is clean, the water will be clear again.

It is important to fully rinse all the UFO Drivetrain Cleaner off and allow the chain to completely dry before adding a UFO Drip chain coating.

Store out of direct sunlight

UFO Drivetrain Cleaner is safe to use in an ultrasonic cleaner from 40-60 degrees Celsius.

How to apply UFO Drip All Conditions:

Thoroughly shake bottle before use.

For new chains or the first application, start with a fully clean and dry chain. Apply UFO Drip All Conditions wax coating directly to the chain rollers over the cassette while rotating the chain slowly to coat the entire length of the chain twice. Next, apply UFO coating to the inside of the chain, along the rollers on the bottom span over the chain and coat the entire length of the chain twice. A complete coating will use about 8ml, or an 8-gram difference by weight. For best penetration, continue rotating the cranks for 30 to 60 seconds to ensure the wax can get down between the chain rollers and links. For best durability and clean performance, let the UFO Drip chain coating dry overnight. It is not suggested to wipe off the wax from the surface of the chain. A proper application will last 300km / 180 miles in generally dry and clean conditions.

For standard reapplication, wipe off any surface dust with a clean towel and apply UFO coating to the chain links above the cassette along the length of the chain twice.

If the drivetrain has been contaminated, the bike has been washed, or ridden in wet conditions we suggest a full clean and reapplication following the first application guidelines. If you ride in the wet often, we recommend the UFO Drip Wet Conditions.

Keep it out of direct sunlight and in a temperature range of 5-30 degrees Celsius (30-85 Fahrenheit). – do not freeze.

How to apply UFO Drip Wet:

Thoroughly shake bottle before use.

For new chains or the first application, start with a fully clean and dry chain. Apply UFO Drip Wet Conditions chain coating directly to the chain rollers over the cassette while rotating the chain slowly to coat the entire length of the chain twice. Next, apply UFO coating to the inside of the chain, along the rollers on the bottom span over the chain and coat the entire length of the chain twice. A complete coating will use about 8ml, or an 8-gram difference by weight. For best penetration, continue rotating the cranks for 30 to 60 seconds to ensure the wax can get down between the chain rollers and links. For best durability and clean performance, let the UFO chain coating dry overnight. It is not suggested to wipe off the wax from the surface of the chain.

It is always suggested after wet riding conditions to clean the chain and reapply a fresh UFO chain coating. If it has been a dry ride, wipe off any surface dust with a clean towel and apply UFO coating to the chain links above the cassette along the length of the chain twice.

Keep it out of direct sunlight and in a temperature range of 5-30 degrees Celsius (30-85 Fahrenheit). – do not freeze