UFO Essentials Bundle

Begin by rinsing the bike with water to soften any dried mud and debris.

Thoroughly shake the bottle before use.

Spray a brush or sponge 3-4 times with the foaming UFO Bike Wash and gently scrub the bike, starting with painted surfaces, metal surfaces, and finally the wheels and tires. Repeat until the whole bike is covered in soapy foam. You will have up to 30 washes in one bottle using this method.

When the bike is soapy let it sit for 3-5 minutes to break down dirt and grease. Avoid contact with disc brake rotors.

Rinse the bike thoroughly with water and dry it with a clean towel.

UFO Bike Wash is available in a 125ml concentrate. Pour the entire concentrate into the 500ml trigger bottle, and add 250ml of water (or 2x the concentrate bottle) to create full strength bike wash.

How to apply UFO Drip Indoor

Thoroughly shake bottle before use.

For new chains or the first application, start with a fully clean and dry chain. Apply UFO Indoor chain coating directly to the chain rollers, with at least one large drop per roller. You can also apply the same as the other UFO Drip products, directly to the chain rollers over the cassette while rotating the chain slowly to coat the entire length of the chain twice. For best penetration, continue rotating the cranks for 30 to 60 seconds to ensure the wax can get down between the chain rollers and links. A normal application will last 5-8 hours of indoor riding time. Directly reapply when the noise levels begin to increase.

When transitioning to outdoor use, use UFO Drivetrain Cleaner sprayed onto a towel and wipe the chain links and rollers to remove the tacky surface finish and apply UFO Drip All Conditions or UFO Drip Wet Conditions as normal.